Figure 7-142. Rrd6 Filter Configuration Page; Table 7-114. Rrd6 Filter Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Filters
Clicking the F
ILTERS
(Figure
7-142). The parameters for this page are shown in
Table 7-114. RRD6 Filter Configuration Page Parameters
Parameter
IPv6 address
Prefix Length
Source
Destination
Action
Figure 7-142. RRD6 Filter Configuration Page
tab brings up the RRD6 F
Description
This parameter specifies the IPv6 Address.
This parameter indicates the length of the prefix (in bits) associated with
this entry's IPv6 address.
This parameter denotes the address of the Source.
This parameter specifies the address of the Destination.
With this parameter you can either choose to Permit (not to filter) or Deny
(Filter) for the above configuration set.
C
ILTER
ONFIGURATION
7-162
page
Table
7-114.
Advertisement
Table of Contents
