Port Channel; Figure 7-84. La Port Channel Settings Page; Table 7-61. La Port Channel Settings Page Parameters - Supermicro SuperBlade Series User Manual

Port Channel

Clicking the P
ORT
page (Figure 7-84), which is used to edit the Port Channel configuration. The first table
is for creating Port Channel interfaces while the second table is for editing the Port
Channel configuration. The third table is used to display the Port Channels and to delete
the existing Port Channels.
The parameters for this page are shown in

Table 7-61. LA Port Channel Settings Page Parameters

Parameter
Port Channel ID
Action Type
Ports
MAC Selection
Force MAC
Chapter 7: Layer 2/3 Ethernet Switch Firmware

Figure 7-84. LA Port Channel Settings Page

C S
HANNEL ETTINGS
Description
This parameter specifies the identifier of the port channel interface.
This parameter specifies whether the port channel must be created or
deleted.
This parameter specifies the interface indices that must be configured to
be members of the Port Channel.
This parameter specifies the mode by which the MAC address for the port
channel is assigned. It can be dynamic or the user can Force the selection
of a specific MAC address.
This parameter specifies the MAC Address that is assigned to the port
channel. For this, the MAC selection mode must be Force.
tab brings up the LA P
Table 7-61.
7-97
C S
ORT HANNEL ETTINGS