3.1 System Settings
System Settings covers basic System Settings and System Version information.
3.1.1 System Settings Page
Basic System Settings page provides system related information and also helps configuration
system specific parameters.
User can configure the below listed parameters in System Settings.
Device name
SNMP Engine ID
Device contact
Device Location
System MTU
9216. The default value is 1500.
ZTP Config Restore Option - User can configure ZTP Enable or Disable option.
Release: 1.0
MBM-GEM-004 Switch Web User Guide
Fig: Basic System Settings
- configure the device name
- SNMP Engine Identifier
- change device contact
- change device location
- Configure MTU value. The allowed value ranges between 1500 to
16 / 164