Ospf Area Aggregation; Figure 7-123. Ospf Area Aggregation Page; Table 7-96. Ospf Area Aggregation Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
OSPF Area Aggregation
Clicking the A
GGREGATION
(Figure
7-123). The parameters for this page are shown in
Table 7-96. OSPF Area Aggregation Page Parameters
Parameter
Area ID
Lsdb Type
Network
Mask
Advertise
External Tag
Figure 7-123. OSPF Area Aggregation Page
tab brings up the OSPF A
Description
This parameter specifies the area associated with the OSPF address
range. It is specified as an IP address.
This parameter specifies the link state data base type as a Summary Link
or as a NSSA External Link.
This parameter specifies the network address.
This parameter specifies the network mask.
This parameter specifies the advertise option as Advertise Matching or Do
Not Advertise Matching.
This parameter is not used by the OSPF protocol itself. It may be used to
communicate information between AS boundary routers. The precise
nature of this information is outside the scope of OSPF.
A
REA
7-138
page
GGREGATION
Table
7-96.
Advertisement
Table of Contents
