Figure 7-81. Mstp Cist Port Status Page; Table 7-58. Mstp Cist Port Status Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
CIST Port Status
Clicking the CIST P
(Figure
7-81), which displays MSTP CIST port specific information. The parameters for
this page are shown in
Table 7-58. MSTP CIST Port Status Page Parameters
Parameter
Designated Root
Designated Bridge
Designated Port
Designated Cost
Regional Root
Regional Path Cost
Type
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Figure 7-81. MSTP CIST Port Status Page
S
tab brings up the MSTP CIST P
ORT
TATUS
Table
7-58.
Description
This parameter specifies the unique Bridge Identifier of the Bridge
recorded as the Root for the segment to which the port is attached.
This parameter specifies the Bridge Identifier of the bridge, which this port
considers to be the Designated Bridge for this port's segment.
This parameter specifies the Port Identifier of the port on the Designated
Bridge for this port's segment.
This parameter specifies the path cost of the Designated Port of the
segment connected to this port.
This parameter specifies the unique Bridge Identifier of the bridge recorded
as the CIST Regional Root Identifier in the configuration BPDUs
transmitted.
This parameter specifies the contribution of this port to the path cost of
paths towards the CIST Regional Root, which includes this port.
This parameter specifies the operational point-to-point status of the LAN
segment attached to this port. It indicates whether a port is considered to
have a point-to-point connection or shared media.
7-93
S
page
ORT
TATUS
Advertisement
Table of Contents
