Figure 7-21. Syslog Mail Configuration Page; Table 7-10. Syslog Mail Configuration Page Parameters - Supermicro SuperBlade Series User Manual

Superblade Network Modules User's Manual
Table 7-9. Syslog Configuration Page Parameters (Continued)
Parameter
Facility
Traps
Syslog Mail Configuration
Clicking the M
AIL
which allows you to configure the mail server and mail addresses for the syslog feature.
The parameters for this page are shown in

Table 7-10. Syslog Mail Configuration Page Parameters

Parameter
Mail Server IP Address
Sender Email ID
Receiver Email ID
Description
This parameter allows you to select supported facilities. The switch
supports syslog standard supported facilities
3, 4,
LOCAL LOCAL
This parameter helps you to select a particular trap type. The following
types of traps are supported A
E , I
RROR NFORMATIONAL

Figure 7-21. Syslog Mail Configuration Page

tab brings up the S
YSLOG
Description
This parameter specifies the IP address of the mail server. Make sure the
mail server is reachable.
This parameter specifies the Email ID to be shown as the From address on
Syslog Emails.
This parameter specifies the receipent Email address for Syslog Emails.
5, 6,
LOCAL LOCAL LOCAL
, C
LERTS RITICIAL
, N and W
OTIFICATION
M C
AIL ONFIGURATION
Table 7-10.
7-26
0, 1,
LOCAL LOCAL
7 and .
USER
, D , E
EBUGGING MERGENCIES
.
ARNINGS
page (Figure
2,
LOCAL
,
7-21),