Port Manager; Port Basic Settings; Figure 7-56. Port Basic Settings Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Port Manager
The P
M
ORT
ANAGER
•
"Port Basic Settings" on page 7-66
•
"Port Monitoring" on page 7-68
•
"VLAN Traffic Class" on page 7-69
•
"Port Control" on page 7-70
•
"Rate Limiting" on page 7-71
NOTE: In all port based configuration pages, the port number group links are
provided on the top.
In the normal standalone operation of the switch, there is only one link and the
corresponding port configuration is displayed below it.
In case of stacking, multiple groups of port links are displayed. These links
provide the configuration of ports from different stack member switches. To view
the configuration of ports from a particular stack member switch, select the
corresponding port links. For example, if three switches having switch identifier
as 1, 2, and 3 are stacked together, the links will be as follows.
Gi1/1-Ex1/2 | Gi2/1-Ex2/2 | Gi3/1-Ex3/2
So to view the ports of switch 2, you need to select the Gi2/1-Ex2/2 link.
Port Basic Settings
link has links to the following web pages:
Figure 7-56. Port Basic Settings Page
7-66
Advertisement
Table of Contents
