Table 7-23. SNMP Trap Settings Page Parameters
Parameter
Notify Name
Notify Tag
Notify Type
Storage Type
SNMP AgentX
Figure 7-35. SNMP AgentX Subagent Settings Page
Clicking the A
GENT
(Figure
7-35), which allows you to configure SNMP Agentx sub-agent parameters. The
parameters for this page are shown in
Table 7-24. SNMP AgentX Subagent Settings Page Parameters
Parameter
Transport Domain
IP Address Type
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
N
N
is a unique identifier associated with the entry.
OTIFY
AME
N
T
contains a single tag value, which is used to select entries in
OTIFY
AG
the Target Address table. Any entry in the Target Address table that
contains a tag value equal to the value of an instance of this Trap Manager,
is selected.
The type of notification of the SNMP Trap Settings can be configured as
Trap or Inform.
S
T
can be configured as Volatile or Non-Volatile.
TORAGE
YPE
X link brings up the SNMP A
Description
This parameter allows you to specify the TCP.
This parameter specifies IPv4 or IPv6 for the IP A
X S
GENT
UBAGENT
Table
7-24.
7-41
S
page
ETTINGS
T
.
DDRESS
YPE