Port Settings; Static Vlan; Figure 7-63. Static Vlan Configuration Page - Supermicro SuperBlade Series User Manual

Superblade Network Modules User's Manual
Clicking the P
ORT
which is used to associate the VLAN ID to the port for Port based VLAN classification.
While associating different ports to VLANs, you can also configure I
(at the port level) and A
frames).
The other configurations provided in this page are, enabling/disabling per Port MAC
based classification and Port Protocol based classification, enabling/disabling of
tunneling and enabling/disabling of STP BPDU Tunneling. To enable STP BPDU
Tunneling on an interface, you must first enable tunneling on that interface.

Static VLAN

Clicking the S
TATIC
(Figure 7-63), which allows you to configure the VLAN related information statically.
Using the first table you can create new entries for uncreated VLANs. VLAN ID is the
mandatory field in configuring a VLAN. You can also enter a VLAN N
L , U
IST NTAGGED
The second table displays the VLAN configurations saved in the switch.
S tab brings up the VLAN P
ETTINGS
F
CCEPTABLE

Figure 7-63. Static VLAN Configuration Page

VLAN tab brings up the S
S
P and the F
ORT ORBIDDEN
ORT
T (accept Tagged Frame Alone or All
RAME YPES
VLAN C
TATIC
P for a VLAN.
ORTS
7-74
S page (Figure
ETTINGS
F
NGRESS
page
ONFIGURATION
, M
AME EMBER
7-62),
ILTERING
P
ORT