Figure 7-196. Rip6 Route Information Page; Table 7-164. Rip6 Route Information Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-163. RIP6 Interface Statistics Page Parameters (Continued)
Parameter
In Discards
Out Msg
Out Req
Out Resp
Out TrigUpd
RIP6 Route Information
Clicking the R
OUTE
(Figure
7-196), which displays information about RIPng routes. The parameters for this
page are shown in
Table 7-164. RIP6 Route Information Page Parameters
Parameter
Destination
Prefix-len
Description
This parameter specifies the number of received packets discarded.
This parameter specifies the number of RIPng packets transmitted.
This parameter specifies the number of RIPng request packets
transmitted.
This parameter specifies the number of RIPng response packets
transmitted.
This parameter specifies the number of RIPng triggered updates
transmitted.
Figure 7-196. RIP6 Route Information Page
I
tab brings up the RIP6 R
NFORMATION
Table
7-164.
Description
This parameter specifies the route destination.
This parameter specifies the length of the route prefix.
OUTE
7-228
I
page
NFORMATION
Advertisement
Table of Contents
