1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Parameter
LA Status
System Priority
System ID
Interface Settings
Figure 5-74. Port Channel Interface Basic Settings Page
Clicking the I
NTERFACE
S
page
ETTINGS
parameters for this page are shown in
Table 5-57. Port Channel Interface Basic Settings Page Parameters
Parameter
Port Channel ID
Table 5-56. LA Basic Settings Page Parameters
Description
This is used to enable or disable LA in the switch.
This parameter specifies the priority value associated with the Actor's system ID.
This parameter specifies the Bridge MAC Address that is displayed. This is a
read-only parameter.
S
tab brings up the P
ETTINGS
(Figure
5-74), which allows you to configure port channels. The
Description
This parameter specifies the identifier of the port channel interface. The valids
values are between 1 to 65535.
C
ORT
Table
5-57.
5-96
I
B
HANNEL
NTERFACE
ASIC