Snmp Target Parameter Settings; Figure 7-32. Snmp Target Parameter Settings Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-20. SNMP Target Address Settings Page Parameters (Continued)
Parameter
Target Timeout
Target Retries
Transport Tag
Param
Storage Type
SNMP Target Parameter Settings
Figure 7-32. SNMP Target Parameter Settings Page
Clicking the T
ARGET
page
(Figure
7-32), which configures SNMP Target Address parameters. The
parameters for this page are shown in
Description
T
T
specifies the maximum round trip for communicating with
ARGET
IMEOUT
the T
IP A
ARGET
DDRESS
T
R
specifies the number of attempts to be made when no
ARGET
ETRIES
response is received
The T
T
RANSPORT
AG
operation.
P
contains SNMP parameters to be used when generating messages
ARAM
to be sent to a transport address.
Use this parameter to specify whether the S
non-volatile.
P
tab brings up the SNMP T
ARAMETER
Table
.
value is used to select a target address for a particular
ARGET
7-21.
7-38
T
is volatile or
TORAGE
YPE
P
S
ARAMETER
ETTINGS
Advertisement
Table of Contents
