Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-97. OSPF As External Aggregation Configuration Page Parameters
Parameter
Aggregation Effect
Translation
Description
This parameter specifies the Aggreation option as one of the following:
• Advertise – When set to advertise and associated Area ID is 0.0.0.0,
then the aggregated Type-5 are generated. Otherwise if the
associated Area ID is x.x.x.x (other than 0.0.0.0), then the aggregated
Type-7 is generated in NSSA x.x.x.x for the specified range.
• Do Not Advertise – When set to doNotAdvertise (2) and associated
Area ID is 0.0.0.0, then the Type-5 is not generated for the specified
range, while aggregated Type-7 are generated in all attached NSSA.
While if the associated Area ID is x.x.x.x (other than 0.0.0.0), then the
Type-7 are not generated in NSSA x.x.x.x for the specified range.
• Allow All – When set to allowAll and associated Area ID is 0.0.0.0,
then the aggregated Type-5 are generated for the specified range. In
addition aggregated Type-7 are generated in all attached NSSA for
the specified range.
• Deny All – When set to denyAll neither Type-5 nor Type-7 will be
generated for the specified range.
This parameter enables or disables the translation.
7-140
Advertisement
Table of Contents
