Garp Timers; Figure 7-71. Garp Timers Configuration Page; Table 7-49. Garp Timers Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
GARP Timers
Clicking the G
ARP
(Figure
7-71), which displays the various parameters for changing Garp times. The
parameters for this page are shown in
Table 7-49. Garp Timers Configuration Page Parameters
Parameter
Port No
Garp Join Time (msecs)
Garp Leave Time (msecs)
Garp Leave All Time
(msecs)
Figure 7-71. Garp Timers Configuration Page
T
tab brings up the G
IMERS
Description
This parameter displays the Port Number.
This parameter allows you to change the Garp Join Time.
This parameter allows you to change the Garp Leave Time.
This parameter allows you to change the Garp Leave All Time.
T
C
ARP
IMERS
Table
7-49.
7-82
page
ONFIGURATION
Advertisement
Table of Contents
