Interface Settings - Supermicro SSE-G24-TG4 User Manual

Parameter
System Control
LA Status
System Priority
System ID

Interface Settings

Figure 5-79. Port Channel Interface Basic Settings Page
Clicking the I
NTERFACE
S page
ETTINGS
parameters for this page are shown in
Table 5-60. Port Channel Interface Basic Settings Page Parameters
Parameter
Port Channel ID
Admin Status
MTU
Table 5-59. LA Basic Settings Page Parameters
Description
This parameter Starts or Shutsdown LA in the switch.
This is used to enable or disable LA in the switch.
This parameter specifies the priority value associated with the Actor's system ID.
This parameter specifies the Bridge MAC Address that is displayed. This is a
read-only parameter.
S tab brings up the P
ETTINGS
(Figure 5-79), which allows you to configure port channels. The
Description
This parameter specifies the identifier of the port channel interface. The valids
values are between 1 to 65535.
This parameter administratively makes the port channel Up or Down.
This parameter specifies the MTU value for this port channel.
Chapter 5: Web Based Management Utility
C
ORT
Table 5-60.
5-91
I B
HANNEL NTERFACE ASIC