La (Link Aggregation); Figure 7-82. La Basic Settings Page; Table 7-59. La Basic Settings Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
LA (Link Aggregation)
The LA link provides links to the following configuration pages:
•
"LA Basic Settings" on page 7-95
•
"Interface Settings" on page 7-96
•
"Port Channel" on page 7-97
•
"Port Settings" on page 7-98
•
"Port State Info" on page 7-99
•
"Load Balancing" on page 7-100
LA Basic Settings
Clicking the
BASIC
which displays the various parameters for LA basic settings. The parameters for this
page are shown in
Parameter
System Control
LA Status
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Figure 7-82. LA Basic Settings Page
S
tab brings up the LA B
ETTINGS
Table
7-59.
Table 7-59. LA Basic Settings Page Parameters
Description
This parameter Starts or Shutsdown LA in the switch.
This is used to enable or disable LA in the switch.
S
ASIC
ETTINGS
7-95
page
(Figure
7-82),
Advertisement
Table of Contents
