Ospf Neighbor; Figure 7-121. Ospf Neighbor Configuration Page; Table 7-94. Ospf Neighbor Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-93. OSPF Virtual Interface Configuration Page Parameters (Continued)
Parameter
MD5 Key ID
Authentication Key
OSPF Neighbor
Clicking the N
EIGHBOR
(Figure
7-121), which allows you to configure OSPF neighbors. The parameters for this
page are shown in
Table 7-94. OSPF Neighbor Configuration Page Parameters
Parameter
Neighbor IP Address
Priority
Description
This parameter specifies the secret key used to create the message digest
appended to the OSPF packet if the authentication type is MD5.
This parameter specifies the key required for authentication, if
authentication is enabled on this interface.
Figure 7-121. OSPF Neighbor Configuration Page
tab brings up the OSPF N
Table
7-94.
Description
This parameter specifies the neighbor router ID.
This parameter specifies a number value for the router priority.
C
EIGHBOR
7-136
page
ONFIGURATION
Advertisement
Table of Contents
