Figure 7-210. Pim Route Information Page; Table 7-178. Pim Route Information Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
PIM Route Information
Clicking the M
ROUTE
(Figure
7-210), which displays PIM route information. The parameters for this page are
shown in
Table
Table 7-178. PIM Route Information Page Parameters
Parameter
Group
Source
Mask
Upstream Neighbor
Interface
Up Time
Expiry Time
Receive Packets
Figure 7-210. PIM Route Information Page
I
tab brings up the PIM R
NFO
7-178.
Description
This parameter specifies the group address.
This parameter specifies the source address.
This parameter specifies the PIM route mask.
This parameter specifies the upstream neighbor address.
This parameter specifies the
This parameter specifies the up time in seconds.
This parameter specifies the expiry time in seconds.
This parameter specifies the number of packets received.
I
OUTE
NFORMATION
7-246
page
Advertisement
Table of Contents
