History Control Configuration; Figure 7-40. History Control Configuration Page; Table 7-28. History Control Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Table 7-27. Ethernet Statistics Configuration Page Parameters (Continued)
Parameter
Multicast Packets
Owner
History Control Configuration
Clicking the H
ISTORY
(Figure
7-40), which configures RMON history parameters. The parameters for this
page are shown in
Table 7-28. History Control Configuration Page Parameters
Parameter
Index
Data Source
Buckets Requested
Interval
Owner
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
This parameter specifies the total number of multicast packets received
from the network.
This parameter specifies the owner string.
Figure 7-40. History Control Configuration Page
tab brings up the H
Table
7-28.
Description
This parameter specifies the index to the table.
This parameter specifies the SNMP object ID of the variable for which the
history is being collected.
Indicates the number of buckets to be configured for collecting the RMON
statistics.
This parameter specifies the time interval between two successive polls to
collect the statistics.
Denotes the owner of the RMON group of statistics.
C
C
ISTORY
ONTROL
7-47
page
ONFIGURATION
Advertisement
Table of Contents
