Figure 6-22. Uplink Failure Tracking Configuration Screen; Table 6-9. Uplink Failure Tracking Configuration Screen Controls - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Note that ULTF will only drop an internal link from the blade to the switch if all of the
(external) uplinks defined for that blade have failed (or been disabled) on that switch. As
long as one or more of uplinks on a particular switch (that have been defined for a
particular downlink) is active, the blade and switch will keep the internal link active.
Figure 6-22. Uplink Failure Tracking Configuration Screen
Table 6-9. Uplink Failure Tracking Configuration Screen Controls
Control
Enable UpLink Failure
Tracking
Modify Uplink Member
Modify Downlink Member
Uplink Track Member
Downlink Track Member
Description
Enables/Disables the UPLINK FAILURE TRACKING feature.
Select the pair ID and uplink port number to add/delete to/from uplink
member of a pair.
Select the pair ID and downlink port number to add/delete to/from downlink
member of a pair.
This column defines member ports of an uplink in a ULFT pair.
This column defines member ports of a downlink in a ULFT pair.
6-32
Advertisement
Table of Contents
