Ssh Configuration; Figure 7-18. Ssh Configuration; Table 7-8. Ssh Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
SSH Configuration
Clicking the SSH tab brings up the SSH C
allows you to configure the SSH (Secure Shell) version and keys. The parameters for
this page are shown in
Parameter
SSH Version
Cipher
Authentication
Figure 7-18. SSH Configuration
Table
7-8.
Table 7-8. SSH Configuration Page Parameters
Description
The default for this parameter is v2. You can choose to configure this as
compatible with v1 instead.
The default for this parameter is 3DES-CBC. You can instead choose to
configure it as 3DES-CBC or DES-CBC or both
This parameter's default is HMAC-SHA1. You can instead choose to
configure it as HMAC-SHA1 or HMAC-MD5 or both.
page
ONFIGURATION
7-22
(Figure
7-18), which
Advertisement
Table of Contents
