Management User Account; Figure 7-13. Management User Account Page; Table 7-3. Management Security Basic Settings Page Parameters - Supermicro SuperBlade Series User Manual

Table 7-3. Management Security Basic Settings Page Parameters

Parameter
Authentication mode
Authentication traps
Administrative users can also create Enable Passwords in this page. Low privilege
users can use these Enable Passwords in the W
privilege configurations.
Administrative users can set an Enable Password for all privilege levels. By default, the
Enable Password is set only for the highest level (Level_15). This default password is
the same as the default password set for the ADMIN user login.

Management User Account

Clicking the L
OCAL
C
ONFIGURATION
accounts. You need more than privilege Level_5 to view all pages and need more than
privilege Level_10 for changing the configurations. The highest, Level_15, is for
Administrator privilege.
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
Use this parameter to choose the mode of authentication for management
access. By default the management access is authenticated with L
user accounts information. However you can choose to authenticate using
Radius or TACACS instead.
You can enable SNMP Traps for SNMP access authentication events
using this parameter..

Figure 7-13. Management User Account Page

U tab brings up the M
SERS
page (Figure 7-13). This page allows you to create or delete local user
S
EB ETTINGS
U
ANAGEMENT
7-17
page to enable access to
A
SER CCOUNT
OCAL