Led Indicators; Ports; Table 5-17. Sbm-Xem-X10Sm 10 Gigabit Ethernet Switch Module Features; Table 5-18. Sbm-Xem-X10Sm Ports - Supermicro SuperBlade Series User Manual

Table 5-17. SBM-XEM-X10SM 10 Gigabit Ethernet Switch Module Features

Feature
Chipset
Internal/External Ports
Bandwidth
Trunking
Jumbo Frame Support
Remote Management
Protocols
Power Consumption
Operating System

LED Indicators

LED indicators for the SBM-XEM-X10SM 10-Gigabit Ethernet switch module are listed
and described in

Ports

The SBM-XEM-X10SM 10-Gigabit Ethernet switch module contains several
front-mounted ports as described below in
Port
RS-232 Compatible Serial Port
RJ45 Ethernet Ports
USB Port
SFP+ 10-Gbps Port
Description
Broadcom BCM56820
Internal: Twenty 10-Gbps downlink ports
External: Four (TwinBlade) or Ten (Ten Blade) 10-Gbps uplink ports
(SPF+)
480-Gbps
Link Aggregation Support (Full 802.3 ad)
Up to 9KB
Browser-based management or Command Line Interface (CLI)
Spanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, IGMP
snooping and 802.1x
Firmware (see Section 3-4: Firmware for the 1/10 Gigabit and 10-Gigabit
Ethernet Switch Modules on page 3-13
Table B-6 of Appendix

Table 5-18. SBM-XEM-X10SM Ports

Description
This port accepts a connector cable for uplink using RS-232
connection to a console.
These two ports accept a RJ45 connector for 1-Gbps uplink
communications.
This port is for a USB connector for switch console communications.
This port accepts a SFP+ Direct Attach connector or fiber with
transceiver for 10-Gbps uplink communications.
Chapter 5: Ethernet Modules
for details)
B.
Table 5-6.
5-13