Figure 7-136. Bgp Community Management Page - Supermicro SuperBlade Series User Manual

Table 7-108. Advanced BGP Configuration Page Parameters (Continued)
Parameter
Dampening Max Suppress
Time
Dampening Decay
Granularity
Dampening Reuse
Granularity
Dampening Reuse Array
Size
Confederation Identifier
Best Path MED Confed
Confederation Peers
BGP Community Management

Figure 7-136. BGP Community Management Page

Clicking the C
OMMUNITY
(Figure 7-136), which configures BGP community and extended community parameters.
The parameters for this page are shown in
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
This parameter specifies the maximum time (in seconds) a route can be
suppressed.
This parameter specifies the time granularity in seconds used to perform
all decay computations.
This parameter specifies the time interval between evaluations of the
reuse-lists. Each reuse lists corresponds to an additional time increment.
This parameter specifies the size of the reuse index arrays. This size
determines the accuracy with which suppressed routes can be placed
within the set of reuse lists, when suppressed for a long time.
This parameter specifies the BGP confederation identifier. The possible
values are between 1 to 65535. Configuring 0 removes the existing
configuration.
This parameter enables or disables MED comparison among paths learnt
from confed peers.
This parameter configures the ASs that belongs to the confederation.
tab brings up the BGP C
7-155
M
OMMUNITY ANAGEMENT
Table 7-109.
page