Snmp Trap Settings; Figure 7-34. Snmp Trap Settings Page; Table 7-22. Snmp Security Settings Page Parameters - Supermicro SuperBlade Series User Manual

Superblade Network Modules User's Manual

Table 7-22. SNMP Security Settings Page Parameters

Parameter
User Name
Authentication Protocol
Authentication Key
Privacy Protocol
Privacy Key
Storage Type

SNMP Trap Settings

Clicking the T
RAP
which configures the set of management targets that must receive notifications. The
parameters for this page are shown in
Description
U N is the (User-based Security) model dependent security ID.
SER AME
The A
UTHENTICATION
The A
UTHENTICATION
messages sent on behalf of this user to/from the SNMP.
P P
RIVACY ROTOCOL
behalf of this user to/from the SNMP are protected from disclosure, and if
so, the type of privacy protocol that is used.
P K is an indication of whether or not messages sent on behalf of
RIVACY EY
this user to/from the SNMP are protected from disclosure.
S T can be configured as Volatile or Non-Volatile.
TORAGE YPE

Figure 7-34. SNMP Trap Settings Page

M tab brings up the SNMP T
ANAGER
P is used for authentication.
ROTOCOL
K is the secret authentication key used for
EY
is an indication of whether or not messages sent on
RAP
Table 7-23.
7-40
S page (Figure
ETTINGS
7-34),