Supermicro SuperBlade Series User Manual page 85

Table 6-3. Port Statistics Screen Controls (Continued)
Control
Errors
Summary
DropEvents
UnknownProtos
TotalRxMulticastPkts
TotalRxBrodcastPkts
RxUndersizePkts
RxOversizePkts
RxFragments
RxJabbers
TxCollisions
RxCRCAlignErr
Total Octets Rx
Total Pkts Rx
64 Bytes Rx Pkts
65-127 Bytes Rx Pkts
128-255 Bytes Rx Pkts
256-511 Bytes Rx Pkts
512-1023 Bytes Rx Pkts
1024-1518 Bytes Rx
Pkts
Chapter 6: 1-Gb Ethernet Switch Firmware
Description
Indicates undersize/fragment/FCS error/oversized errors with good FCS
packets.
Displays traffic information by packet type, type of error and frame size
range.
Indicates events in which packets are dropped due to a lack of resources.
This includes events where the receiving shared buffer is full, and events
when a transmission failure is due to a late collision.
Indicates received packets using unknown protocols, such as packets that
are dropped due to reasons other than drop events and storm limits.
Indicates the total received multicast packets.
Indicates the total received broadcast packets.
Indicates received packets with a length that is less than the minimum
packet size.
Indicates received packets with length more than the maximum packet
size.
Indicates received packets (length 10 ~ 63 bytes) with an invalid FCS or an
alignment error.
Indicates received packets (invalid FCS or code error) that exceed the
counter maximum size to the maximum received frame length.
Indicates the total transmitted collision packets.
Indicates received packets (invalid FCS) that have a length between 64
bytes and the counter maximum size.
Indicates total number of octets of data received (excluding framing bits,
but including FCS bytes).
Indicates total received packet count (including all bad packets, unicast,
broadcast, multicast and MAC control packets).
Indicates received packets with a packet length that is less than or equal to
64 bytes.
Indicates received packets with a packet length that is between (includes)
65 ~ 127 bytes.
Indicates received packets with a packet length that is between (includes)
128 ~ 255 bytes.
Indicates received packets with a packet length that is between (includes)
256 ~ 511 bytes.
Indicates received packets with a packet length that is between (includes)
512 ~ 1023 bytes.
indicates received packets with a packet length that is between (includes)
1024 ~ 1518 bytes.
6-9