Appendix Bled Descriptions; Gigabit Ethernet Module Led Descriptions; Table B-1. Gigabit Ethernet Switch Led Indicators - Supermicro SuperBlade Series User Manual

This appendix covers LED descriptions for the blade enclosure and other module
components. The LED descriptions for the InfiniBand switch, Gigabit Ethernet modules
and Blade modules are included here for your reference.
B-1

Gigabit Ethernet Module LED Descriptions

SBM-GEM-001 Gigabit Ethernet module and SBM-GEM-002 Pass-through module
LEDs are described below in
LED
Module Initiation OK
LED
(GEM-001 Module
Only)
Module Fault LED
(Red)
(GEM-001 Module
Only)
Link/Activity Ethernet
Port Status LED
Speed Ethernet Port
Status LED
(GEM-001 Module
Only)
Appendix B
LED Descriptions
Table

Table B-1. Gigabit Ethernet Switch LED Indicators

State Description
The GEM-001 GbE switch module is operational and has
Steady On
passed the POST (Power-On Self-Test) with no critical faults.
When lit, this LED indicates that the GEM-001 GbE switch
module has either failed the POST or has detected an
Steady On
operational fault within the module. When this LED is lit, the
fault LED on the blade enclosure will also turn on.
Solid Green This indicates that the link is established, no activity
This indicates that data is being transmitted (Tx) or received
Blinking Green
(Rx)
Off This indicates that no link is established
Amber Connection speed of the port is 1-Gb/sec
Green Connection speed of the port is 100 Mb/sec
Off Connection speed of the port is 10 Mb/sec
B-1.
B-1