Table 7-89. Rip6 Filter Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Table 7-89. RIP6 Filter Configuration Page Parameters
Parameter
Filter Address
Filter Type
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
This parameter specifies the F
This parameter specifies the F
configured.
7-131
A
for the RIP6 interface.
ILTER
DDRESS
T
for which RIP6 needs to be
ILTER
YPE
Advertisement
Table of Contents
