Event Configuration; Figure 7-37. Event Configuration Settings Page; Table 7-25. Event Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Event Configuration
Clicking the E
VENTS
configures RMON events. The parameters for this page are shown in
Parameter
Index
Description
Type
Community
Owner
Last Time Sent
Figure 7-37. Event Configuration Settings Page
tab brings up the E
Table 7-25. Event Configuration Page Parameters
Description
This parameter specifies the index to the Events table.
This parameter specifies a brief description of the event.
This parameter specifies the event configured. This can be a Log, an
SNMP Trap, Both, or None. For the event type to display, TRAP and Log
and TRAP Community must be configured.
This parameter specifies the SNMP community string used for this trap.
This is relevant when an SNMP trap is requested for an event. For event
type to display, TRAP and Log and TRAP Community must be configured.
Also make sure the configured community is active before adding an event
on that community.
This parameter indicates the owner of this event.
This parameter denotes the time this event entry last generated an event.
C
VENT
ONFIGURATIONS
7-44
page
(Figure
7-37), which
Table
7-25.
Advertisement
Table of Contents
