Figure 7-151. Igmp Snooping Vlan Router Ports Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Table 7-120. IGMP Snooping Interface Configuration Page Parameters (Continued)
Parameter
Fast Leave
Querier Status
Querier Interval(secs)
Router Port List
Current Version
Current Querier Status
IGMP Snooping VLAN Router
Figure 7-151. IGMP Snooping VLAN Router Ports Page
Clicking the R
OUTE
page
(Figure
7-151). The parameters for this page are shown in
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
This parameter indicates whether the fast leave processing for a specific
VLAN, is to be enabled or disabled.
This parameter specifies whether the IGMP snooping switch is enabled or
disabled as a querier for a specific VLAN.
This parameter specifies the time period for which general queries are sent
by the IGMP snooping switch, when configured as querier on a VLAN.
This parameter specifies the router port list for a specific VLAN.
This parameter specifies the working IGMP Version on the given VLAN.
This parameter specifies the current status of the Querier.
P
tab brings up the IGMP S
ORTS
NOOPING
7-171
VLAN R
P
OUTER
ORTS
Table
7-121.
Advertisement
Table of Contents
