Figure 6-16. L2 Management Screen; Figure 6-17. L2 Management: Current Entries Screen - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Figure 6-16. L2 Management Screen
To remove the specified static MAC address from the table, click the D
link for that
ELETE
MAC address as shown in
Figure 6-17
when there are static entries in the table.
To search for a MAC address to see if it exists in the table or not, enter the MAC
and VID, then click on L
button. If the MAC address is in L2
ADDRESS
OOKUP
ADDRESS
table, whether it is a static or a dynamic MAC address, the result will be displayed.
To show all of MAC address in the L2 table, click the SHOW link next to S
L2
HOW
A
.
DDRESSES
Figure 6-17. L2 Management: Current Entries Screen
6-20
Advertisement
Table of Contents
