Figure 7-156. Igmp Interface Configuration Page; Table 7-124. Igmp Interface Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Interface Configuration
Clicking the I
NTERFACE
C
ONFIGURATION
Table
7-124.
Table 7-124. IGMP Interface Configuration Page Parameters
Parameter
Interface
IGMP Status
Operating Version
Fast Leave
Query Interval
Query Response Time
Robustness Value
Figure 7-156. IGMP Interface Configuration Page
C
ONFIGURATION
page
(Figure
7-156). The parameters for this page are shown in
Description
This parameter specifies the interface index.
This parameter specifies the IGMP Status.
With this parameter you can choose to run either in IGMP Version 1, IGMP
Version 2 or IGMP Version 3. This can be configured for every interface.
This parameter indicates whether the fast leave processing for a specific
interface, is to be enabled or disabled.
This parameter indicates the interval between two successive IGMP
queries.
This parameter specifies the response time for IGMP queries.
This parameter specifies the R
tab brings up the IGMP I
OBUSTNESS
7-176
NTERFACE
V
on this interface.
ALUE
Advertisement
Table of Contents
