Ip Route; Figure 7-98. Ip Route Configuration Page; Table 7-72. Ip Route Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
IP Route
Clicking the IP R
which allows you to configure the static IP routes. The parameters for this page are
shown in
Table
Table 7-72. IP Route Configuration Page Parameters
Parameter
Destination Network
Subnet Mask
Gateway
Interface
Distance (Metric)
Figure 7-98. IP Route Configuration Page
tab brings up the IP R
OUTE
7-72.
Description
This parameter specifies the network address for which the route is being
added.
This parameter indicates the subnet mask for the Destination Network
address.
This parameter denotes the Next Hop Gateway to reach the IP address.
This parameter specifies the outgoing interface.
This parameter specifies the metric value of the destination.
C
OUTE
ONFIGURATION
7-112
page
(Figure
7-98),
Advertisement
Table of Contents
