Superblade Network Modules User's Manual
Timers
Clicking the T
IMERS
which configures Timer parameters at the individual port level. The parameters for this
page are shown in
Table 7-65. 802.1x Timer Configuration Page Parameters
Parameter
Port
Quiet Period (Seconds)
Transmit Period (Seconds)
Re-authentication Period
(Seconds)
Figure 7-90. 802.1x Timer Configuration Page
tab brings up the 802.1
Table
7-13.
Description
This parameter is the index of the port for which fields such as Q
P
, T
ERIOD
RANSMIT
This parameter specifies the duration for which the authenticator will be
silent and will not attempt to acquire a supplicant. It can be configured to
any value in the range from 1 to 65535 seconds.
This parameter specifies the time period used by the Authenticator State
machine to define when the EAPOL PDU is to be transmitted. It can be
configured to any value in the range from 1 to 65535 seconds.
This parameter specifies the time between periodic re-authentication of the
supplicant.
T
C
X
IMER
ONFIGURATION
P
, and such are configured.
ERIOD
7-104
page
(Figure
7-90),
UIET