Vlan Interface; Ip V4 Interface Settings; Figure 7-96. Vlan Interface Basic Settings Page; Table 7-70. Vlan Interface Basic Settings Page Parameters - Supermicro SuperBlade Series User Manual

Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Hide thumbs Also See for SuperBlade Series:
Table of Contents

Advertisement

Superblade Network Modules User's Manual
IP
The IP link enables you to perform IP related configuration. This can be done through
the following pages.
"Vlan Interface" on page 7-110
"IP V4 Interface Settings" on page 7-111
"IP Route" on page 7-112
"LoopBack Basic Settings" on page 7-113

Vlan Interface

Clicking the VLAN I
(Figure
7-96), which allows configuring of L3 VLAN interfaces. The parameters for this
page are shown in

Table 7-70. VLAN Interface Basic Settings Page Parameters

Parameter
VLAN Interface
Admin State
MTU

Figure 7-96. VLAN Interface Basic Settings Page

tab brings up the VLAN I
NTERFACE
Table
7-70.
Description
This parameter specifies the VLAN identifier.
This parameter specifies the admin state as either Up or Down.
This parameter specifies the maximum transfer unit size in bytes.
NTERFACE
7-110
B
S
page
ASIC
ETTINGS

Advertisement

Table of Contents
loading

Table of Contents