Bgp; Bgp Basic Settings; Bgp Peer Configuration; Bgp Med Configuration - Supermicro SuperBlade Series User Manual

Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Hide thumbs Also See for SuperBlade Series:
Table of Contents

Advertisement

BGP

The BGP link allows you to configure the BGP protocol. Following are the configuration
parameters available to manage BGP through this interface:
"BGP Basic Settings" on page 7-147
"BGP Peer Configuration" on page 7-148
"BGP MED Configuration" on page 7-149
"Local Preference" on page 7-150
"BGP Filter" on page 7-152
"Route Aggregations" on page 7-153
"Advanced BGP Configuration" on page 7-154
"BGP Community Management" on page 7-155

BGP Basic Settings

Clicking the B
ASICS
parameters for this page are shown in
Chapter 7: Layer 2/3 Ethernet Switch Firmware

Figure 7-129. BGP Basic Settings Page

tab brings up the BGP B
Table
7-147
S
page
ASIC
ETTINGS
7-102.
(Figure
7-129). The

Advertisement

Table of Contents
loading

Table of Contents