Area; Figure 7-127. Ospfv3 Area Settings Page; Table 7-100. Ospfv3 Area Settings Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Area
Clicking the A
REA
parameters for this page are shown in
Table 7-100. OSPFv3 Area Settings Page Parameters
Parameter
Area ID
Type
Area Summary
Stub Metric
NSSA Translator Role
NSSA Stability Interval
Stub Metric Type
Figure 7-127. OSPFv3 Area Settings Page
tab brings up the OSPF
Description
This parameter uniquely identifies an area.
This parameter indicates whether an area is a Stub area, NSSA, or
Standard (normal) area.
This parameter controls the import of Inter-Area LSAs into stub areas. This
can be noAreaSummary or sendAreaSummary.
This parameter indicates the metric value advertised for the default route
into Stub area and NSSA.
This parameter specifies the NSSA Border router's ability to perform NSSA
translation of type-7 LSAs into type-5 LSAs.
This parameter specifies the number of seconds after an elected translator
determines its services are no longer required, in which it must continue to
perform its translation duties.
This parameter specifies the type of metric (OSPFv3 Metric, External Type
1, External Type 2) advertised as a default route.
3 A
S
V
REA
ETTINGS
Table
7-100.
7-144
page
(Figure
7-127). The
Advertisement
Table of Contents
