Table 7-136. Ethernet Statistics Page Parameters - Supermicro SuperBlade Series User Manual

Superblade Network Modules User's Manual
Parameter
Index
Alignment Errors
FCS Errors
Single Collision Frames
Multiple Collision Frames
SQE Test Errors
Deferred Transmissions
Late Collisions
Excess Collisions
Transmitted Internal MAC
Errors
Carrier Sense Errors
Frame Too Long
Received Internal MAC
Errors
Symbol Errors
Duplex Status

Table 7-136. Ethernet Statistics Page Parameters

Description
This parameter specifies the port index.
This parameter specifies the number of alignment errors. Alighment errors
generally indicate improper byte-alignment for Ethernet packets.
This parameter specifies the number of packets received with checksum
errors.
This parameter specifies the number of frames received with a collision.
This parameter specifies the number of frames received with multiple
collisions.
This parameter specifies the number of Signal Quality Errors that have
occurred.
This parameter specifies the number of frames deferred for transmissions
due to network sense.
This parameter specifies the number of frames faced late collisions. A
collision is considered late if the jam occurs after 512 bit-times, or 64 bytes.
This parameter specifies the number of excess collisions detected.
Excessive Collisions describe the situation where a station has tried 16
times to transmit without success and discards the frame. This means that
there is excessive traffic on the network and this must be reduced.
This parameter specifies the number of MAC transmit errors.
This parameter specifies the number of carrier sense errors.
This parameter specifies the number of too long frames received for
transmission.
This parameter specifies the number of MAC received errors.
This parameter specifies the number of symbol errors.
This parameter specifies the current status of duplex.
7-190