Dhcp Server; Dhcp Basic Settings; Figure 7-106. Dhcp Basic Settings Page; Table 7-80. Dhcp Basic Settings Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
DHCP Server
The DHCP Server link helps you to manage the DHCP server in the switch through the
following two pages:
•
"DHCP Basic Settings" on page 7-120
•
"Pool Settings" on page 7-121
DHCP Basic Settings
Clicking the DHCP S
(Figure
7-106). The parameters for this page are shown in
Table 7-80. DHCP Basic Settings Page Parameters
Parameter
DHCP-Server
Offer-reuse Time out
(seconds)
ICMP Echo
Figure 7-106. DHCP Basic Settings Page
tab brings up the DHCP B
ETTINGS
Description
With this parameter you can enable or disable the DHCP server using this
configuration.
This parameter specifies the Reuse Timeout value that can be configured
in this field, which is used by DHCP.
This parameter enables or disables the ICMP Echo feature.
7-120
S
page
ASIC
ETTINGS
Table
7-80.
Advertisement
Table of Contents
