Radius; Figure 7-14. Radius Server Configuration Page; Table 7-4. Radius Server Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Radius
Clicking the R
ADIUS
(Figure
7-14). This page allows you to configure the RADIUS server parameters as
shown in
Table
Table 7-4. Radius Server Configuration Page Parameters
Parameter
Server ID
IP Address
Shared Secret
Server Type
Response Time (secs)
Retry Count
Figure 7-14. Radius Server Configuration Page
tab brings up the R
7-4.
Description
This parameter specifies the unique identifier of the Radius Server Entry.
This parameter specifies the IP Address of the Radius Server.
Use this parameter to specify the secret string, which is to be shared
between the Radius Server and the Radius Client.
This parameter specifies the following RADIUS server type
• Authentication
• Accounting
• Both (Authentication and Accounting).
This parameter specifies the maximum time that the Radius Server has to
respond for a request from the Radius Client.
This parameter specifies the maximum number of times a radius request is
re-transmitted before getting a response from the Radius Server.
S
C
ADIUS
ERVER
ONFIGURATION
7-18
page
Advertisement
Table of Contents
