Rrd6; Rrd6 Basic Settings; Filters; Rrd V6 Ospf - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
RRD6
The RRD6 link allows you to perform RRD6 related configuration through the following
pages.
•
"RRD6 Basic Settings" on page 7-161
•
"Filters" on page 7-162
•
"RRD V6 OSPF" on page 7-163
•
"RRD RIP" on page 7-164
RRD6 Basic Settings
Clicking the B
S
ASIC
(Figure
7-141), which has the single parameter option of changing the throat limit for
RRD6.
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Figure 7-141. RRD6 Basic Settings Page
tab brings up the RRD6 B
ETTINGS
7-161
S
page
ASIC
ETTINGS
Advertisement
Table of Contents
