Snmp Group Access Settings; Figure 7-29. Snmp Group Access Settings Page; Table 7-18. Snmp Group Access Settings Page Parameters - Supermicro SuperBlade Series User Manual

Table 7-17. SNMP Group Settings Page Parameters (Continued)
Parameter
Group Name
Storage Type

SNMP Group Access Settings

Clicking the G
ROUP
(Figure 7-29), which displays the access rights of groups. Each entry is indexed by a
G N , a Context Prefix, a S
ROUP AME
view name (R
EAD
displays the S
TORAGE
created prior to the Group Access configuration.
The parameters for this page are shown in

Table 7-18. SNMP Group Access Settings Page Parameters

Parameter
Group Name
Security Model
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
Use this parameter to specify the G
Use this parameter to specify whether the S
Non-Volatile.

Figure 7-29. SNMP Group Access Settings Page

A tab brings up the SNMP G
CCESS
, W and M
RITE ODIFY
T of the Group Access table. An SNMP Group must be
YPE
Description
This parameter allows you to specify the G
This parameter allows you to specify whether SNMP version v1, v2 or v3 is
used. Version 3 is the most secure model as it allows packet encryption
with the private key word.
ROUP
M and a S
ECURITY ODEL
) must be used for access control checking. It also
Table 7-18.
7-35
N string.
AME
T is Volatile or
TORAGE YPE
A S
ROUP CCESS ETTINGS
L . A proper
ECURITY EVEL
N string.
ROUP AME
page