TACACS+ Global Settings
The TACACS+ G
retries and choose an active TACACS server. The parameters for this page are shown
in
Table
7-5.
Table 7-5. TACACS+ Global Settings Page Parameters
Parameter
Active Server IP Address
Retries
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Figure 7-15. TACACS+ Global Settings Page
S
page
LOBAL
ETTINGS
Description
This parameter specifies the IP address of the active TACACS server. This
server should have been already configured in the following TACACS+
S
C
ERVER
ONFIGURATION
This parameter determines the number of times the switch searches the
active TACACS server from the list of servers maintained. The allowed
values are between 1 to 100.
(Figure
7-15) allows you to configure TACACS
page
(Figure
7-16).
7-19