Address Summarization; Figure 7-114. Rip Interface Specific Address Summarization Page; Table 7-87. Rip Interface Specific Address Summarization Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Address Summarization
Figure 7-114. RIP Interface Specific Address Summarization Page
Clicking the S
UMMARIZATION
S
UMMARIZATION
Table
7-87.
Table 7-87. RIP Interface Specific Address Summarization Page Parameters
Parameter
Interface
Aggregate Address
Subnet Mask
tab brings up the RIP I
page
(Figure
7-114). The parameters for this page are shown in
Description
This parameter specifies the Interface ID for which the RIP aggregate
address needs to be configured.
This parameter specifies the aggregate address.
This parameter specifies the mask of the aggregate address.
NTERFACE
7-128
S
A
PECIFIC
DDRESS
Advertisement
Table of Contents
