Dhcp Relay; Dhcp Relay Basic Settings; Figure 7-108. Dhcp Relay Configuration Page; Table 7-82. Dhcp Relay Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
DHCP Relay
The DHCP Relay link helps you to manage the DHCP relay in the switch through the
following two pages:
•
"DHCP Relay Basic Settings" on page 7-122
•
"Interface Settings" on page 7-123
DHCP Relay Basic Settings
Clicking the B
ASIC
(Figure
7-108), which displays the various parameters for configuring the DHCP relay.
The parameters for this page are shown in
Table 7-82. DHCP Relay Configuration Page Parameters
Parameter
Service DHCP-Relay
IP DHCP Relay Information
Option
DHCP Server Address
Figure 7-108. DHCP Relay Configuration Page
S
tab brings up the DHCP R
ETTINGS
Description
This parameter specifies the DHCP relay status that can be enabled or
disabled in the switch using this field.
You can enable/disable this field to control the processing related to the
Relay Agent Information options.
This parameter indicates the IP address of the DHCP Server to which the
Relay Agent needs to forward the packets from the client.
ELAY
Table
7-82.
7-122
C
page
ONFIGURATION
Advertisement
Table of Contents
