Multicast Filters; Figure 7-94. L2 Multicast Filter Configuration Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-68. L2 Unicast Filter Configuration Page Parameters (Continued)
Parameter
Allowed Ports
Status
Multicast Filters
Figure 7-94. L2 Multicast Filter Configuration Page
Clicking the M
ULTICAST
page
(Figure
7-22), which allows you to set the filter configuration to control the
multicast packets that the switch needs to process. The parameters for this page are
shown in
Table
Description
This parameter specifies the list of ports on which the received packet, with
the above set MAC address (if received from the configured port) can be
forwarded.
You can choose to set this configuration to any one of the following types:
• Other – For entries currently in use, but whose conditions remain
different from the following values.
• Permanent – Entries that reside even after the restart of the switch.
• DeleteOnReset – This deletes the entry on restart.
• DeleteOnTimeout – This deletes the entry on expiration of the ageing
timer.
F
tab brings up the L2 M
ILTERS
7-13.
ULTICAST
7-108
F
C
ILTER
ONFIGURATION
Advertisement
Table of Contents
