Snmp User Settings; Figure 7-33. Snmp Security Settings Page; Table 7-21. Snmp Target Parameter Settings Page Parameters - Supermicro SuperBlade Series User Manual

Table 7-21. SNMP Target Parameter Settings Page Parameters

Parameter
Parameter Name
MP Model
Security Model
Security Name
Security Level
Storage Type

SNMP User Settings

Clicking the U
SER
which configures users configured in the SNMP for the User-based Security Model. The
parameters for this page are shown in
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
The target parameter is an unique name that specifies SNMP target
information to be used in the generation of SNMP messages.
The Message Processing (MP) Model is used when generating SNMP
messages using this entry.
The S M
ECURITY ODEL
entry.
The S N
ECURITY AME
behalf SNMP messages will be generated.
S L specifies the level of security used when generating
ECURITY EVEL
SNMP messages.
S T can be configured as Volatile or Non-Volatil
TORAGE YPE

Figure 7-33. SNMP Security Settings Page

tab brings up the SNMP S
is used when generating SNMP messages using this
identifies the current P
S
ECURITY ETTINGS
Table 7-22.
7-39
N , on whose
ARAMETER AME
.
E
page (Figure 7-33),