Figure 7-91. Local Authentication Server Configuration Page; Table 7-66. Local Authentication Server Configuration Page Parameters - Supermicro SuperBlade Series User Manual

Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Hide thumbs Also See for SuperBlade Series:
Table of Contents

Advertisement

Local AS

Figure 7-91. Local Authentication Server Configuration Page

Clicking the L
OCAL
page
(Figure
7-22), which configures Local Authentication Server information. The
parameters for this page are shown in

Table 7-66. Local Authentication Server Configuration Page Parameters

Parameter
User Name
Password
Permission
Port List
Chapter 7: Layer 2/3 Ethernet Switch Firmware
AS tab brings up the L
Description
This parameter specifies the identity of the user who is seeking
authentication, and is set by a string of not more than 20 printable
characters.
This parameter specifies the password specific to the user name, and is
set by a string of not more than 20 printable characters.
This parameter represents the allowance and denial of access. The values
that can be configured are:
• Allow - When set to Allow, the authentication request is allowed over
the set of ports in the P
• Deny - When set to Deny, the authentication request is NOT allowed
over the set of ports in the P
This parameter represents the complete set of ports of the authenticator to
which the user is allowed or denied access. It is based on permission.
A
OCAL
UTHENTICATION
Table
7-13.
L
.
ORT
IST
L
ORT
IST
7-105
S
C
ERVER
ONFIGURATION
.

Advertisement

Table of Contents
loading

Table of Contents