Basic Settings; Port Settings; Timers; Local As - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
802.1x
The 802.1x link provides link to the following configuration pages:
•
"Basic Settings" on page 7-101
•
"Port Settings" on page 7-102
•
"Timers" on page 7-104
•
"Local AS" on page 7-105
•
"MAC Session Info" on page 7-106
Basic Settings
Clicking the B
ASIC
(Figure
7-88), which displays the various 802.1x Basic Settings parameters. The
parameters for this page are shown in
Table 7-63. 802.1x Basic Settings Page Parameters
Parameter
System Control
802.1x Authentication
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Figure 7-88. 802.1x Basic Settings Page
S
tab brings up the 802.1
ETTINGS
Description
This parameter starts or shutsdown 802.1x in the switch.
This parameter allows enabling or disabling of the 802.1x based port
security feature in the switch.
B
X
ASIC
Table
7-63.
7-101
S
page
ETTINGS
Advertisement
Table of Contents
