Neighbors List; Figure 7-112. Rip Neighbor List Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-85. RIP Interface Page Parameters (Continued)
Parameter
Update Timer
Garbage Timer
Neighbors List
Clicking the N
EIGHBORS
is used to configure the RIP neighbors, by configuring their IP address.
The single parameter for this page is IP A
neighbor router to which the unicast update has to be sent.
Description
This parameter specifies the time interval between successive RIP
updates.
This parameter specifies the time interval after which the invalid routes will
be removed from the routing table.
Figure 7-112. RIP Neighbor List Page
tab brings up the RIP N
7-126
L
page
EIGHBOR
IST
, which specifies the IP Address of the
DDRESS
(Figure
7-112), which
Advertisement
Table of Contents
